3LP01C no.6645-1/4 features low on-resistance. high-speed switching. 2.5v drive. specifications absolute maximum ratings at ta=25 c parameter symbol conditions ratings unit drain-to-source voltage v dss --30 v gate-to-source voltage v gss 10 v drain current (dc) i d --0.1 a drain current (pulse) i dp pw 10 s, duty cycle 1% --0.4 a allowable power dissipation p d 0.25 w channel temperature tch 150 c storage temperature tstg --55 to +150 c electrical characteristics at ta=25 c ratings parameter symbol conditions min typ max unit drain-to-source breakdown voltage v (br)dss i d =--1ma, v gs =0v --30 v zero-gate voltage drain current i dss v ds =--30v, v gs =0v --1 a gate-to-sourse leakage current i gss v gs = 8v, v ds =0v 10 a cutoff voltage v gs (off) v ds =--10v, i d =--100 a --0.4 --1.4 v forward transfer admittance ? yfs ? v ds =--10v, i d =--50ma 80 110 ms r ds (on)1 i d =--50ma, v gs =--4v 8 10.4 static drain-to-source on-state resistance r ds (on)2 i d =--30ma, v gs =--2.5v 11 15.4 r ds (on)3 i d =--1ma, v gs =--1.5v 27 54 marking : xa continued on next page. www.semiconductor-sanyo.com/network ordering number : en6645b 32509 ms im tc-00001903 / 72606 / 33006pe ms im tb-00002203 / 90100 ts im ta-1982 specifications of any and all sanyo semiconductor co.,ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer ' s products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer ' s products or equipment. any and all sanyo semiconductor co.,ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, av equipment, communication device, office equipment, industrial equipment etc.). the products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. if you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. if there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. sanyo semiconductors data sheet 3LP01C p-channel silicon mosfet general-purpose switching device applications http://semicon.sanyo.com/en/network
3LP01C no.6645-2/4 continued from preceding page. ratings parameter symbol conditions min typ max unit input capacitance ciss v ds =--10v, f=1mhz 7.5 pf output capacitance coss v ds =--10v, f=1mhz 5.7 pf reverse transfer capacitance crss v ds =--10v, f=1mhz 1.8 pf turn-on delay time t d (on) see specified test circuit. 24 ns rise time t r see specified test circuit. 55 ns turn-off delay time t d (off) see specified test circuit. 120 ns fall time t f see specified test circuit. 130 ns total gate charge qg v ds =--10v, v gs =--10v, i d =--100ma 1.43 nc gate-to-source charge qgs v ds =--10v, v gs =--10v, i d =--100ma 0.18 nc gate-to-drain miller charge qgd v ds =--10v, v gs =--10v, i d =--100ma 0.25 nc diode forward voltage v sd i s =--100ma, v gs =0v --0.83 --1.2 v package dimensions switching time test circuit unit : mm (typ) 7013a-013 1 : gate 2 : source 3 : drain sanyo : cp 12 3 1.5 2.5 1.1 0.3 0.05 2.9 0.95 0.4 0.1 0.5 0.5 pw=10 s d.c. 1% 0v --4v v in p. g 50 g d i d = --50ma r l =300 v dd = --15v v out 3LP01C s v in 0 0 --0.01 --0.02 --0.03 --0.04 --0.06 --0.07 --0.08 --0.09 --0.10 -- 0 . 4 --0.05 --0.8 --1.2 --1.6 --2.0 --0.2 --0.6 --1.0 --1.4 --1.8 i d -- v ds v gs = --1.5v --3.5v --6.0v --2.0v --4.0v --3.0v --2.5v 0 --0.5 --1.0 --1.5 --2.0 --2.5 --3.0 --4.0 -- 3 . 5 0 --0.02 --0.04 --0.06 --0.08 --0.10 --0.12 --0.14 --0.16 --0.18 --0.20 i d -- v gs v ds = --10v it00077 it00078 ta= --25 c 25 c 75 c drain current, i d -- a drain current, i d -- a drain-to-source voltage, v ds -- v gate-to-source voltage, v gs -- v
3LP01C no.6645-3/4 it00085 --0.01 23 57 10 7 5 3 2 7 5 3 2 --0.1 1000 100 it00086 v dd = --15v v gs = --4v t f t r t d (off) t d (on) --60 4 2 --40 6 --20 8 10 0 12 14 20 40 16 60 18 80 100 120 140 160 v gs = --2.5v, i d = --30ma v gs = --4.0v, i d = --50ma it00083 it00084 it00081 it00082 static drain-to-source on-state resistance, r ds (on) -- ? ? ? ?
3LP01C no.6645-4/4 sanyo semiconductor co.,ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all sanyo semiconductor co.,ltd. products described or contained herein. sanyo semiconductor co.,ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. it is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of sanyo semiconductor co.,ltd. or any third party. sanyo semiconductor co.,ltd. shall not be liable for any claim or suits with regard to a third party?s intellectual property rights which has resulted from the use of the technical information and products mentioned above. information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equipment, refer to the "delivery specification" for the sanyo semiconductor co.,ltd. product that you intend to use. in the event that any or all sanyo semiconductor co.,ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of sanyo semiconductor co.,ltd. ps it02382 ambient temperature, ta -- c p d -- ta allowable power dissipation, p d -- w 0 0.30 0.15 0.20 0.10 0.05 0.25 0 40 120 160 80 20 100 140 60 0 0 -- 1 -- 2 -- 3 -- 4 -- 5 -- 6 -- 7 -- 8 1.6 0.6 0.8 1.0 1.2 1.4 0.2 0.4 -- 9 -- 1 0 v ds = --10v i d = --0.1a 0 1.0 -- 5 10 7 5 3 2 7 5 3 2 -- 1 0 -- 1 5 100 -- 2 0 -- 3 0 -- 2 5 f=1mhz it00087 it00088 ciss coss crss drain-to-source voltage, v ds -- v ciss, coss, crss -- v ds ciss, coss, crss -- pf total gate charge, qg -- nc v gs -- qg gate-to-sourse voltage, v gs -- v note on usage : since the 3LP01C is a mosfet product, please avoid using this device in the vicinity of highly charged objects. this catalog provides information as of march, 2009. specifications and information herein are subject to change without notice.
|
